BGXP11S_X-ray array sensor chips_Image Sensor Chips

Home - Product Center - Image Sensor Chips - X-ray array sensor chips

X-ray array sensor chips-BGXP11S

Add to comparison

BGXP11 is two-dimensional CMOS image sensor designed for X-ray flat panel detector, which requires high resolution, low noise, large area and wide dynamic range. Based on BGM’ s excellent radiation-hard design and unique ADC-integrated scheme, the BGXP11 offers the highest technical performance and easy to be integrated.

Features:

· Small pixel pitch
· ADC-integrated scheme
· Low noise
· Wide dynamic range
· Radiation-hard
· Stable offset calibration
· Low power consumption

Applications:

Medical (Especially suitable for mammography )
Crystallography
Non-destructive testing

Datasheet

Parameter

Parameter		Values	Unit
Active pixel array area		115.20 × 147.45	mm
Active pixel array		2400(H) × 3052(V)
Pixel size		48 × 48	um
Frame rate		14 bit-60 fps @ full frame/14 bit-30 fps @ HDR mode
Shutter		Electronic rolling shutter
Read noise		277 @ HFW/50 @ LFW	e-
Dynamic range		70 /90	dB
Full well capacity		1.5 Me- @ HFW/160 Ke- @ LFW
Dark current@25℃		550	e-/s/pixel
Radiation Hardness TID		50	kGy
Output interface		LVDS
Dosage sensing		Supports Full Field of View DS
Binning		2×2 binning
Data Format		12bit/14bit/16bit RAW
Power supply	VDDD	2.8	V
	VDDIO	1.8~3.3
	VLDOIN	4.2
Power consumption		10 W @ 60 fps~14 bit
Temperature range		0~65①	℃
Control interface		IIC
		① The temperature mentioned here refers to the chip temperature, so the board design must pay attention to heat dissipation.

Parameter	Parameter Value	Unit
Optical format	115.2mm x 146.5mm
Pixel size	48μm
Resolution	2400H x 3052V
Frame rate	60fps
Data interface	Serial LVDS

QE Curve