RV400_Small array sensor chips_Image Sensor Chips

Home - Product Center - Image Sensor Chips - Small array sensor chips

Small array sensor chips-RV400

Add to comparison

The RV400 image sensor has a maximum resolution of 1000H ×1000V and is designed with high-performance infrared-enhanced 1.4um BSI pixels. By utilizing Binning technology, it can achieve high-quality, high-frame-rate images with a resolution of 500H x 500V, where the pixel sensitivity is equivalent to that of high-performance BSI pixels of 2.8um. The RV400 adopts an innovative architectural design that supports low-power, high-frame-rate image capture, capable of achieving high-speed imaging at 320fps with a resolution of 500 by 500 pixels. This ultra-high Frame rate can achieve an effect akin to global exposure and is compatible with LVDS/MIPI 10bit / 8bit image output modes, meeting a wider range of solution requirements.

Features:

· 1.4um × 1.4um pixels (High-Resolution Mode) /2.8um × 2.8um pixels (High-Frame-Rate Mode)
· Support switching between high-sensitivity mode and high signal-to-noise ratio mode
· Adopt near-infrared enhancement technology to significantly improve near-infrared sensitivity
· The Maximum Frame rate is 320 FPS @ 500H × 500V and 400FPS@500H × 400V
· The Maximum quantization accuracy is 10bit
· 1lane MIPI/LVDS output
· Standby power consumption below 10uW
· Ultra-low power design with a power consumption of 48mW at 320fps and a minimum power consumption of 25mW at 120fps.
· Compact design without external capacitors, meeting the demand for miniaturization of equipment
· High power supply rejection ratio, reducing the difficulty of board-level design

Applications:

IoT
Machine Vision
AR/VR SLAM
Eye Tracking
UAVs

Datasheet

Parameter

Parameter	Values	Unit
Optical format	1/9	inch
Active pixel array	500H × 500V (High-Frame-Rate Mode)/1000H × 1000V (High-Resolution Mode)	pixel
Pixel size	2.8 × 2.8 (High-Frame-Rate Mode)/1.4 × 1.4 (High-Resolution Mode)	um
Active pixel array area	1400 × 1400	um
Frame rate	320@500H × 500V / 400@500H × 400V / 80@1000H × 1000V	fps
Color filter array	BW
CRA	30°
Shutter	Electronic Rolling
Sensitivity	8.8High Sensitivity Mode①/2.2High Signal-to-Noise Ratio Mode②	V/lux-s
Dark current@60℃	< 1	e/frame
SNR(max)	37.2@High Sensitivity Mode/43@High Signal-to-Noise Ratio Mode	dB
Dynamic range	72	dB
Output interface	1 lane MIPI / LVDS
Data Format	10/8	bit
Power supply	Digital (1.1~1.3) / Analog (2.7~3)	V
Power consumption	48@320fps 500H × 500V / 25@120fps 500H × 500V	mW
Input signal range	1.6 ~ 3	V
Temperature range	-30 ~ 60③	℃
Packaging	CSP / Module
	①②：Default is set to High Sensitivity Mode; for High Signal-to-Noise Ratio Mode, please contact Sales and FAE.
	③：This temperature is the temperature of the chip, so pay attention to the heat dissipation design when designing the board machine.

Parameter	Parameter Value	Unit
Optical format	1/9"	--
Pixel size	2.8um (high frame rate mode) 1.4um (high resolution mode)	--
Resolution	1000H x 1000V	--
Frame rate	100 fps	--
Data interface	11lane MIPI/LVDS	--

QE Curve